Guidance in Brick Pointing
You will need to use bricks at one point or another in your home, whether during construction, remodeling, or home improvement. Bricks do not only add aesthetic value to your home but they also provide the desired stability that is necessary in any structure.
The following tips will help you with your brick pointing project in Brooklyn:
● Before undertaking a brick pointing project, you should prepare well beforehand. You should know the general layout and the footings if you are building a new wall, this will help you know which stage you are currently on. On other hand, it is important to clear out all decayed mortar if you are re-pointing existing brickwork. In addition to removing the decayed mortar, you should also dampen the surface before starting.
● Use the right kind of sand and make sure to use enough of it. It is important to remember that there are certain types of sand that is not properly graded, which often results in a porous and weak mixture.
● You should get the mix right, ingredients for a good mortar are water, lime or Portland cement, and graded sand; these should be in the right proportions because wrong measurements will result in a weak mortar mixture which will then become brittle or crumbly. In addition you should make just enough of the mixture for your immediate task, because any excess will dry up quickly. Continually turn the mixture over and keep adding water, testing it regularly to check if you have reached the right consistency for your use.
It is recommended that you get the services of local brick pointing Brooklyn contractors, since the project requires a lot of experience and patience in order to produce good results. There are a number of techniques that professionals use in laying old and new brickwork.
Brick pointing should be done at intervals on new brickwork, this means that breaks must be held at certain points in order to allow enough time for cleaning out the surface mortar for that particular section.
Also Read: Resolve Your Brick Pointing Concerns At Once
Any brick pointing Brooklyn expert will tell you that when applying brick pointing techniques on old brickwork, the old mortar should be chipped out and pointed to the right depth, this process will emit a lot of dust and so you should take precautions by wearing a facemask and goggles before undertaking this job.
While undertaking brick pointing in Brooklyn, you should first make sure that the joints are wet before filling them with the pointed mortar. Following these techniques will ensure superior results by the end of your project.
Visit our New Age Brick Pointing Brooklyn page to get a fast & free estimate for your project.